McLennan Servo Supplies Spur Gearbox, 50:1 Gear Ratio, 4 Nm Maximum Torque

RS Stock No.: 718-880Brand: McLennan Servo SuppliesManufacturers Part No.: MRIG17 (50:1)
brand-logo
View all in Gearboxes

Technical Document

Specifications

Gear Ratio

50:1

Gearbox Type

Spur

Maximum Output Torque

4 Nm

Overall Width

56mm

Overall Depth

41mm

Product details

Adaptable Gearboxes 4Nm

A range of high quality steel geared gearboxes with the following features:

Maximum output 4Nm
Metal throughout for high reliability and performance and dissipation of heat
Sintered bronze bearings
Maximum radial load on output shaft 25N
Maximum axial load on output shaft 20N
Maximum continuous output power 15 watts
Output shaft sealed to eliminate grease escaping from the gearbox
Comprehensive instruction sheet supplied giving fitting instructions

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

€ 147.25

Each (ex VAT)

McLennan Servo Supplies Spur Gearbox, 50:1 Gear Ratio, 4 Nm Maximum Torque

€ 147.25

Each (ex VAT)

McLennan Servo Supplies Spur Gearbox, 50:1 Gear Ratio, 4 Nm Maximum Torque
Stock information temporarily unavailable.

Buy in bulk

quantityUnit price
1 - 4€ 147.25
5+€ 142.68

Technical Document

Specifications

Gear Ratio

50:1

Gearbox Type

Spur

Maximum Output Torque

4 Nm

Overall Width

56mm

Overall Depth

41mm

Product details

Adaptable Gearboxes 4Nm

A range of high quality steel geared gearboxes with the following features:

Maximum output 4Nm
Metal throughout for high reliability and performance and dissipation of heat
Sintered bronze bearings
Maximum radial load on output shaft 25N
Maximum axial load on output shaft 20N
Maximum continuous output power 15 watts
Output shaft sealed to eliminate grease escaping from the gearbox
Comprehensive instruction sheet supplied giving fitting instructions

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: