Technical Document
Specifications
Brand
Maxim IntegratedAmplifier Type
Low Noise
Mounting Type
Surface Mount
Package Type
TSSOP
Power Supply Type
Single
Number of Channels per Chip
1
Pin Count
14
Typical Single Supply Voltage
2.7 → 5.5 V
Typical Gain Bandwidth Product
42MHz
Typical Slew Rate
10V/µs
Maximum Operating Frequency
30 kHz
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Typical Voltage Gain
120 dB
Rail to Rail
Rail to Rail Output
Height
0.95mm
Width
4.5mm
Dimensions
5.1 x 4.5 x 0.95mm
Typical Input Voltage Noise Density
4.5nV/√Hz
Length
5.1mm
Country of Origin
Malaysia
Product details
Precision and Low-Noise Operational Amplifiers, Maxim Integrated
The precision and low-noise operational amplifiers are crucially specified for the input offset voltage and the input voltage noise. They are often used to condition the analogue signal from a sensor before it enters an Analogue-to-Digital Converter (ADC).
Operational Amplifiers, Maxim Integrated
$ 33.27
$ 6.655 Each (In a Pack of 5) (ex VAT)
Standard
5
$ 33.27
$ 6.655 Each (In a Pack of 5) (ex VAT)
Standard
5
Stock information temporarily unavailable.
Please check again later.
quantity | Unit price | Per Pack |
---|---|---|
5 - 5 | $ 6.655 | $ 33.27 |
10 - 20 | $ 5.995 | $ 29.97 |
25 - 95 | $ 5.644 | $ 28.22 |
100+ | $ 4.784 | $ 23.92 |
Technical Document
Specifications
Brand
Maxim IntegratedAmplifier Type
Low Noise
Mounting Type
Surface Mount
Package Type
TSSOP
Power Supply Type
Single
Number of Channels per Chip
1
Pin Count
14
Typical Single Supply Voltage
2.7 → 5.5 V
Typical Gain Bandwidth Product
42MHz
Typical Slew Rate
10V/µs
Maximum Operating Frequency
30 kHz
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Typical Voltage Gain
120 dB
Rail to Rail
Rail to Rail Output
Height
0.95mm
Width
4.5mm
Dimensions
5.1 x 4.5 x 0.95mm
Typical Input Voltage Noise Density
4.5nV/√Hz
Length
5.1mm
Country of Origin
Malaysia
Product details
Precision and Low-Noise Operational Amplifiers, Maxim Integrated
The precision and low-noise operational amplifiers are crucially specified for the input offset voltage and the input voltage noise. They are often used to condition the analogue signal from a sensor before it enters an Analogue-to-Digital Converter (ADC).