4D Systems TFT LCD Colour Display / Touch Screen, 4.3in, 480 x 272pixels
Technical Document
Specifications
Brand
4D SystemsDiagonal Display Size
4.3in
Interface Type
SPI
Resolution
480 x 272pixels
Touch Screen
Yes
Viewing Area Dimensions
95.04 x 53.86mm
Touch Screen Type
Resistive
Supply Voltage
3 → 3.6 V
Backlight Type
LED
Display Mode
Transmissive
Dimensions
105.5 x 67.2 x 4.2 (Display)mm
Display Matrix Technology
TFT
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+70°C
Brightness
400cd/m²
Series
FT843
Contrast Ratio
500:1
Viewing Area Height
53.86mm
Viewing Area Width
95.04mm
Operating Temperature Range
-10 → +70°C
Number of Colours
262,144
Width
105.5mm
Response Time
45ms
Current Rating
210mA
Height
67.2mm
Depth
4.2mm
Standards Met
CE
Country of Origin
Philippines
Product details
Resistive Touch LCD SPI Display Starter Kits, 4D Systems
The SK-FT843 range of starter kits from 4D Systems comprise of a 4DLCD-FT483 4.3 inch display module, a black (9048525) or white (9048528) display bezel, a breakout board and corner plates.
Using the display module you can connect to any SPI host. The display module also features an FT800 graphics controller with Embedded Video Engine (EVE) that provides your display with high-quality graphics , software support, libraries and demos.
Features & Benefits of the LCD SPI Display
•480 x 272 pixel resolution
•Up to 262k colours
•Mono PWM audio output
•PWM dimming control
•Power mode control
•Standard 10-way, 0.5 mm FPC ribbon
•Programmable interrupt controller
•64 voice polyphonic sound synthesizer
•Dimensions: 105. mm x 67.2 mm x 4.2 mm
•Viewing area: 95.04 mm x 55.5 mm
•Touch area: 96.07 mm x 55.5 mm
•Flex length: 57.51 mm
•Suitable for a 3.3 V power supply
Bezel
The plastic bezel that is included in the kit comes supplied with brass mounting inserts, 4 spring clips and 8 M2 mounting screws and washers. As well as being a cover for your display, the fixings enable you to panel mount the display into an enclosure.
Breakout Board
The breakout board that is included acts as an interface between the SPI display and a host printed circuit board or breadboard.
4D Systems LCD Touchscreens
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
4D SystemsDiagonal Display Size
4.3in
Interface Type
SPI
Resolution
480 x 272pixels
Touch Screen
Yes
Viewing Area Dimensions
95.04 x 53.86mm
Touch Screen Type
Resistive
Supply Voltage
3 → 3.6 V
Backlight Type
LED
Display Mode
Transmissive
Dimensions
105.5 x 67.2 x 4.2 (Display)mm
Display Matrix Technology
TFT
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+70°C
Brightness
400cd/m²
Series
FT843
Contrast Ratio
500:1
Viewing Area Height
53.86mm
Viewing Area Width
95.04mm
Operating Temperature Range
-10 → +70°C
Number of Colours
262,144
Width
105.5mm
Response Time
45ms
Current Rating
210mA
Height
67.2mm
Depth
4.2mm
Standards Met
CE
Country of Origin
Philippines
Product details
Resistive Touch LCD SPI Display Starter Kits, 4D Systems
The SK-FT843 range of starter kits from 4D Systems comprise of a 4DLCD-FT483 4.3 inch display module, a black (9048525) or white (9048528) display bezel, a breakout board and corner plates.
Using the display module you can connect to any SPI host. The display module also features an FT800 graphics controller with Embedded Video Engine (EVE) that provides your display with high-quality graphics , software support, libraries and demos.
Features & Benefits of the LCD SPI Display
•480 x 272 pixel resolution
•Up to 262k colours
•Mono PWM audio output
•PWM dimming control
•Power mode control
•Standard 10-way, 0.5 mm FPC ribbon
•Programmable interrupt controller
•64 voice polyphonic sound synthesizer
•Dimensions: 105. mm x 67.2 mm x 4.2 mm
•Viewing area: 95.04 mm x 55.5 mm
•Touch area: 96.07 mm x 55.5 mm
•Flex length: 57.51 mm
•Suitable for a 3.3 V power supply
Bezel
The plastic bezel that is included in the kit comes supplied with brass mounting inserts, 4 spring clips and 8 M2 mounting screws and washers. As well as being a cover for your display, the fixings enable you to panel mount the display into an enclosure.
Breakout Board
The breakout board that is included acts as an interface between the SPI display and a host printed circuit board or breadboard.
4D Systems LCD Touchscreens