TE Connectivity, DuraSeal Insulated, Red Crimp Bullet Connector, 0.5mm² to 1mm², 22AWG to 18AWG, 4mm Bullet diameter
Technical Document
Specifications
Brand
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Overall Length
30mm
Gender
Female
Minimum Wire Size mm²
0.5mm²
Maximum Wire Size mm²
1mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Bullet Diameter
4mm
Colour
Red
Contact Plating
Tin
Contact Material
Copper Alloy
Country of Origin
Mexico
Product details
Duraseal - Bullet Terminal
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stock information temporarily unavailable.
Please check again later.
€ 1,162.75
€ 1,162.75 1 Bag of 1000 (ex VAT)
1
€ 1,162.75
€ 1,162.75 1 Bag of 1000 (ex VAT)
1
Technical Document
Specifications
Brand
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Overall Length
30mm
Gender
Female
Minimum Wire Size mm²
0.5mm²
Maximum Wire Size mm²
1mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Bullet Diameter
4mm
Colour
Red
Contact Plating
Tin
Contact Material
Copper Alloy
Country of Origin
Mexico
Product details
Duraseal - Bullet Terminal
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed