Technical Document
Specifications
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Through Hole
Maximum Reset Active Time
700ms
Package Type
TO-92
Pin Count
3
Dimensions
4.71 x 3.62 x 4.62mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Minimum Monitored Voltage
4.62V
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Product details
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current
Supervisory & Reset Circuits - Microchip
Stock information temporarily unavailable.
Please check again later.
€ 0.599
Each (Supplied in a Bag) (ex VAT)
5
€ 0.599
Each (Supplied in a Bag) (ex VAT)
5
Buy in bulk
quantity | Unit price | Per Bag |
---|---|---|
5 - 20 | € 0.599 | € 2.99 |
25 - 95 | € 0.585 | € 2.92 |
100+ | € 0.561 | € 2.81 |
Technical Document
Specifications
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Through Hole
Maximum Reset Active Time
700ms
Package Type
TO-92
Pin Count
3
Dimensions
4.71 x 3.62 x 4.62mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Minimum Monitored Voltage
4.62V
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Product details
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current