Amprobe Cable Tester BNC, RJ45, LAN-1
Technical Document
Specifications
Brand
AmprobeEquipment Type
Cable Tester
Connector Type
BNC, RJ45
Model Number p
LAN-1
Tone
No
Power Source
Battery
Battery Type
9V
Battery Life
20 h
Dimensions
130 x 56 x 38mm
Weight
1.3kg
Display Type
LED
Height
38mm
Length
130mm
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
0°C
Width
56mm
Country of Origin
Taiwan, Province Of China
Product details
Amprobe LAN-1 Network Cable Tester
Designed to work with various data cables and connectors, this cable tester provides a fast go / no-go LED display. It has the ability to either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs to display the results.
Test opens, shorts and miswired cables, verify the wiring for continuity on wall plate or patch panels.
Features and Benefits:
• Loopback test or remote test
• Buzzer sound for errors in the cable
• 300m maximum line length
• Approx. 20 hour battery life
• 2 sets of LED, signal and test
Frequently asked questions:
What is a LAN cable tester?
LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.
How do network cable testers work?
Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.
What is the difference between RJ45 & RJ11?
RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.
Supplied with
Remote terminator, 1 ea RJ45 to female BNC cable, 1 ea RJ45 to male BNC cable, 1 ea RJ45 ot RJ45 cable, 1 ea female BNC to female BNC connector, 9 volt battery and user manual.
Stock information temporarily unavailable.
Please check again later.
€ 134.72
Each (ex VAT)
1
€ 134.72
Each (ex VAT)
1
Technical Document
Specifications
Brand
AmprobeEquipment Type
Cable Tester
Connector Type
BNC, RJ45
Model Number p
LAN-1
Tone
No
Power Source
Battery
Battery Type
9V
Battery Life
20 h
Dimensions
130 x 56 x 38mm
Weight
1.3kg
Display Type
LED
Height
38mm
Length
130mm
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
0°C
Width
56mm
Country of Origin
Taiwan, Province Of China
Product details
Amprobe LAN-1 Network Cable Tester
Designed to work with various data cables and connectors, this cable tester provides a fast go / no-go LED display. It has the ability to either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs to display the results.
Test opens, shorts and miswired cables, verify the wiring for continuity on wall plate or patch panels.
Features and Benefits:
• Loopback test or remote test
• Buzzer sound for errors in the cable
• 300m maximum line length
• Approx. 20 hour battery life
• 2 sets of LED, signal and test
Frequently asked questions:
What is a LAN cable tester?
LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.
How do network cable testers work?
Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.
What is the difference between RJ45 & RJ11?
RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.
Supplied with
Remote terminator, 1 ea RJ45 to female BNC cable, 1 ea RJ45 to male BNC cable, 1 ea RJ45 ot RJ45 cable, 1 ea female BNC to female BNC connector, 9 volt battery and user manual.